4 Scaffold Screw Jack Galvanized 24" X 1-3/8" with A Large Wing Nut for Adjust Scaffolding Frames

Price: $124.99
Product prices and availability are accurate as of 2019-05-18 14:28:55 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Galvanized 24" X 1-3/8" Galvanized Screw Jack with 18" adjustable,

The Screw Jack is made from a 1 3/8 inch Solid Stem with 6" x 6" base & a large wing nut 4 adjustment.

Thread Screw jacks are the accessory used to safely adjust the scaffold legs.

This may be necessary when different working heights are encountered or when the scaffold is mounted on sloped surfaces.

Like all products that CBM supplies, the screw jacks are safety tested to meet or Exceed OSHA or ANSI Standard or building code requirements.

They are designed for ease of operation and are compatible with the rest of the scaffolding system

IF YOU HAVE ANY QUESTIONS PLEASE CLICK ON (CBM1290) AND CALL US.

Product Features

4 Scaffolding Screw Jack Galvanized 24" X 1-3/8" with A Large Wing Nut for 18" Adjustment Scaffolding Screw Jacks are used anytime Scaffolding is built on ground that is not level the 24" Scaffolding Jack, you get 18" of adjust-ability. For fine adjustment of rolling and stationary scaffolding. The Screw Jack is made from a 1 3/8 inch Solid Stem with 6" x 6" base & a large wing nut 4 adjustment IF YOU HAVE ANY QUESTIONS PLEASE CLICK ON (CBM1290) AND CALL US.

Write a Review