Roberts 3095-1 Carpet Adhesive, 1 gal, Beige

Adheres carpet with most backings, including polypropylene (ActionBac), woven, Axminster, Wilton, hot melt, unitary, needle punch (non woven/needle bond), urethane foam (Enhancer), polyurethane laminate (Lifespan), sponge rubber, jute and latex foam Bonds with concrete, underlayment grade APA rated plywood, vinyl composition tile (free of wax) and terrazzo For interior, heavy commercial traffic installations May be used for direct and double bond installations Moisture Control Adhesive up to 10 lbs. MVER and 90% RH Up to 20 minutes open time, 40 minutes working time and 24 to 48 hours curing time Approximately 65 to 110 sq. ft. per gallon coverage for polypropylene/woven carpet and 100 to 200 sq. ft. per gallon coverage for non woven/closed cell/Enhancer carpet installations Suggested for use with a 1/8 " x 1/8 " x 1/8 " U notch trowel, 1/8 " x 1/8 " x 1/16 " V notch trowel, or 3/32 " x 3/32 " x 3/32 " V notch trowel depending on carpet installation type solvent free and LEED compliant; VOC < 1 g/L, SCAQMD Rule 1168 Protected by Gold Guard, an protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives